MAC

MAC 72032 Pfalz D.III a

Pfalz D.III a - Image 1
Skala: 1:72
Proizvođač: MAC
Šifra proizvoda: MAC72032
Trenutna dostupnost: 2-6 недеља
  • Проверите процењени датум испоруке
  • Проверите историју цена
  • Proverite cenovnik isporuke
  • Рецензије производа
1717.78 RSD ili 10600 bod.

PDV od 0% je uključen
za isporuku u zemlji: SERBIA
Da biste promenili zemlju, kliknite ovde

Osnovne informacije

ProizvođačMAC
Šifra proizvoda:MAC72032
Težina0.08 kg
Skala1:72
Dodato je u katalog:27.12.2006
TagoviPfalz-D.III
Pfalz D.III, the most dangerous competitor of the Albatross in the German fighter competition, was established at the beginning of 1917. The year 1916 ended with the reign of Nieuport 11 and the concept of the 1.5-a-fighter. German companies were ordered to copy this concept, this is how the Albatros D.III was created, but the Pfalz constructors did not quite let themselves get carried away by the "half-plane mania". It is true that the lower lobe had a smaller chord than the upper one, but it was not a significant difference, although the influence of the concept is visible. However, the shell structure of the hull turned out to be revolutionary - it was created by covering the wooden skeleton with several layers of veneer strips, which resulted in a rigid and very light structure. In March 1917, Idflieg ordered 70 series aircraft. In June, another 300, but this order was reduced to 190 in favor of the newer D.IIIa model.The basic changes to the D.III were the relocation of the rifles from the inside of the fuselage, the change in the shape of the horizontal tail, and the rounding of the lower lobe tips in later examples. In total, less than 1,000 copies were produced. The first two Pfalz D.III planes went to Jasta 10 and Jasta 22 in August, the next ones were supplied mainly by Bavarian vessels, although in total Pfalz's were passed through 40 different Jagdstafeln and 3 marine Marine Field Jasta. Opinions about the plane were different, e.g. Voss did not like it, while Berthold praised it. Pilots such as Lenz, von Holzem, Baumer, von Degelow and Bethge flew on it. The Pfalz remained in service until the end of the war, although it was definitely replaced by the Fokker D.VII from the frontline units and never posed a serious threat to the position of the Albatross D.III / DV, it is undoubtedly one of the most important aircraft structures from the Great War period. Technical data (version D.IIIa): length: 6.95 m, wingspan: 9.4 m, height: 2.67 m, maximum speed: 165 km / h, climb speed: 3.67 m / s, practical ceiling: 5180 m, armament : fixed - 2 LMG 08/15 machine guns cal.7.92 mm.
Greška u opisu? Prijavi problem
Ocene naših kupaca
Dodajte vašu ocenu o: Pfalz D.III a
...
Dodato je u katalog: 27.12.2006
Trenutna dostupnost: 2-6 недеља
  • proizvod je dostupan
  • proizvod nije dostupan
  • proizvod je dostupan za individualno naručivanje
  • dostava robe
  • nema
  • 1 komad
  • 2 komada
  • 3-5 komada
  • 6-10 komada
  • više od 10 komada
Da li možemo da nabavimo proizvod koji nije dostupan ili kog nema na stranici?
Mogući dodaci

Skala: 1:72
Proizvođač: Part
Šifra proizvoda: PRT-S72-156
Dostupnost: dostupan!

1039.67 RSD ili 6400 bod.

Skala: 1:72
Proizvođač: Part
Šifra proizvoda: PRT-S72-154
Dostupnost: dostupan!

1039.67 RSD ili 6400 bod.

Proizvođač: Albatros Productions
Šifra proizvoda: LBT-WSDA107
Dostupnost: 2-6 недеља

1954.27 RSD ili 12000 bod.

Proizvođač: Albatros Productions
Šifra proizvoda: LBT-WSWW07
Dostupnost: 2-6 недеља

5071.30 RSD ili 31100 bod.

Proizvođač: Albatros Productions
Šifra proizvoda: LBT-WSDA174
Dostupnost: 2-6 недеља

2441.48 RSD ili 15000 bod.

Proizvođač: Albatros Productions
Šifra proizvoda: LBT-WSDA173
Dostupnost: 2-6 недеља

2441.48 RSD ili 15000 bod.

Skala: 1:72
Proizvođač: Peddinghaus-Decals
Šifra proizvoda: PED3965
Dostupnost: dostupan!

649.33 RSD ili 4000 bod.

Skala: 1:72
Proizvođač: Peddinghaus-Decals
Šifra proizvoda: PED3880
Dostupnost: dostupan!

974.14 RSD ili 6000 bod.

Skala: 1:72
Proizvođač: Print Scale
Šifra proizvoda: PRI-72-253
Dostupnost: dostupan!

1780.47 RSD ili 10900 bod.

Skala: 1:72
Proizvođač: Print Scale
Šifra proizvoda: PRI-72-237
Dostupnost: dostupan!

1780.47 RSD ili 10900 bod.

Skala: 1:72
Proizvođač: Print Scale
Šifra proizvoda: PRI-72-227
Dostupnost: 2-6 недеља

1780.47 RSD ili 10900 bod.

Skala: 1:72
Proizvođač: Part
Šifra proizvoda: PRT-S72-210
Dostupnost: dostupan!

720.56 RSD ili 4400 bod.

Slični proizvodi

Skala: 1:72
Proizvođač: MAC
Šifra proizvoda: MAC72128
Dostupnost: dostupan!

1717.78 RSD ili 10600 bod.

Skala: 1:72
Proizvođač: Roden
Šifra proizvoda: rod003
Dostupnost: 2-6 недеља

1122.30 RSD ili 6900 bod.

Skala: 1:144
Proizvođač: Valom
Šifra proizvoda: vlm14423
Dostupnost: dostupan!

1350.24 RSD ili 8300 bod.

Skala: 1:32
Proizvođač: Roden
Šifra proizvoda: rod613
Dostupnost: 2-6 недеља

8832.24 RSD ili 54200 bod.