Dragon

Dragon 9113 German FlammPanzer III (F-1) with Sturmpionier (4 figures, Kursk 1943)

German FlammPanzer III (F-1) with Sturmpionier (4 figures, Kursk 1943) - Image 1
Skala: 1:35
Proizvođač: Dragon
Šifra proizvoda: dra9113
Trenutna dostupnost: nedostupan
Poslednji put je bio dostupan: 30.10.2020
  • Проверите процењени датум испоруке
  • Проверите историју цена
  • Proverite cenovnik isporuke
  • Рецензије производа
4949.55 RSD ili 31100 bod.

PDV od 0% je uključen
za isporuku u zemlji: SERBIA
Da biste promenili zemlju, kliknite ovde

Ako artikal trenutno nije dostupan, ispod upišite svoj imejl – kad se pojavi u prodaji, automatski ćete dobiti obaveštenje!

Da li možemo da nabavimo proizvod koji nije dostupan ili kog nema na stranici?

Osnovne informacije

ProizvođačDragon
Šifra proizvoda:dra9113
Težina0.56 kg
Ean:089195891136
Skala1:35
Dodato je u katalog:14.12.2009
TagoviPzKpfw-III German-World-War-II-Sturmpionier

The PzKpfw III (Panzerkampfwagen III) was a German medium tank from the Second World War. The first prototypes of the vehicle were made in 1936, and serial production continued in the period 1937-1943, ending with the production of about 5,800 vehicles. The tank in the E version was powered by a single Maybach HL 120 TRM engine with a capacity of 300 HP. It was armed with one 37mm KwK 35/36 cannon and two 7.92mm MG 34 machine guns. placed in the tower.

PzKpfw III was the "workhorse" of the German armored forces during World War II and one of the most intensively developed and modernized Wehrmacht tanks. Its serial production started in 1936, and many variants of this tank were created in its course. Chronologically, the first version was the A version, armed with a 37mm gun and a 230hp engine. However, already in December 1938, the E version was created, which was the first version produced in large series. It had a new, significantly more powerful engine, a completely new suspension and stronger armor in the front part of the turret and hull. Later (from December 1940) it was also armed with a more powerful 50mm cannon. In March 1940, the G version began to be produced, in which the rear hull and turret armor was reinforced. Soon after, in October 1940, the production of the H version started, which from the very beginning was armed with the 50mm KwK 38 L / 42 gun and had reinforced frontal armor. One of the most produced was the J version, which had armor up to 50 mm thick (later reinforced with aplique plates), and after the experience gained from the clashes with the T-34 and KW-1 vehicles - it was intensively rearmed for the KwK 39 L / 60 cannon. cal. 50 mm. The last development version was the N version, which was to be a support tank for armored grenadiers and was armed with a 75mm KwK 37 L / 24 short-barreled cannon. Numerous other vehicles were built on the chassis of the PzKpfw III, such as the StuG III assault gun. PzKpfw III tanks were used on almost all fronts of World War II - from the September campaign in 1939, through the campaign in France in 1940, operations Barbarossa and Typhoon in 1941, the Battle of Kursk in 1943, to the last operations of the German army against The USSR and the Western Allies in 1944-1945.

In the course of World War II, German sapper units (German: Pioniere) were assigned in the strength of the battalion to each infantry, armored, mountain, grenadier and panzer grenadier divisions. At the end of the war, they were also assigned to the Volkssturm division. The full-time sapper battalion consisted of, among others, a staff, two companies of sappers, a company of motorized sappers and a motorized bridge column. It is worth adding that the units of sappers (pioneers) in the Wehrmacht, and also in the Waffen SS, were abundantly equipped with machine guns and other support weapons, and the soldiers serving in them had good, and often very good, training. In addition to performing typical engineering and sapper tasks, they were also perceived as assault units (German: Sturmpioniere) intended to attack heavily fortified objects and permanent resistance points. It is worth adding that the Sturmpioniere units very often collaborated with other types of armed forces on ordinary infantry and ending with aviation.

Greška u opisu? Prijavi problem
Ocene naših kupaca
Dodajte vašu ocenu o: German FlammPanzer III (F-1) with Sturmpionier (4 figures, Kursk 1943)
...
Dodato je u katalog: 14.12.2009
Trenutna dostupnost: nedostupan
  • proizvod je dostupan
  • proizvod nije dostupan
  • proizvod je dostupan za individualno naručivanje
  • dostava robe
  • nema
  • 1 komad
  • 2 komada
  • 3-5 komada
  • 6-10 komada
  • više od 10 komada
Da li možemo da nabavimo proizvod koji nije dostupan ili kog nema na stranici?
Mogući dodaci

Skala: 1:35
Proizvođač: DEF Model
Šifra proizvoda: DEF-DO35030
Dostupnost: dostupan!

1871.20 RSD ili 11800 bod.

Skala: 1:35
Proizvođač: VoyagerModel.Co.Ltd
Šifra proizvoda: VOY-PE35158
Dostupnost: dostupan!

3781.61 RSD ili 23800 bod.

Skala: 1:35
Proizvođač: Part
Šifra proizvoda: PRT-P35-129
Dostupnost: dostupan!

1328.95 RSD ili 8400 bod.

Skala: 1:35
Proizvođač: Zebrano
Šifra proizvoda: ZBR-ZA35252
Dostupnost: dostupan!

3169.84 RSD ili 19900 bod.

Skala: 1:35
Proizvođač: Rye Field Model
Šifra proizvoda: RFM-RM-5084
Dostupnost: dostupan!

2571.96 RSD ili 16200 bod.

Skala: 1:35
Proizvođač: T-Rex Studio
Šifra proizvoda: TRE-35028
Dostupnost: dostupan!

1206.59 RSD ili 7600 bod.

Skala: 1:35
Proizvođač: T-Rex Studio
Šifra proizvoda: TRE-35103
Dostupnost: dostupan!

1326.17 RSD ili 8300 bod.

Skala: 1:35
Proizvođač: Aber
Šifra proizvoda: abeG05
Dostupnost: dostupan!

795.03 RSD ili 5000 bod.

Skala: 1:35
Proizvođač: Royal Model di R. Reale
Šifra proizvoda: RLM085
Dostupnost: dostupan!

845.09 RSD ili 5300 bod.

Skala: 1:35
Proizvođač: PanzerArt
Šifra proizvoda: PNZRE35-704
Dostupnost: dostupan!

2199.34 RSD ili 13800 bod.

Skala: 1:35
Proizvođač: Aber
Šifra proizvoda: abe35L-321
Dostupnost: dostupan!

956.32 RSD ili 6000 bod.

Skala: 1:35
Proizvođač: Quick Wheel
Šifra proizvoda: QKW-003
Dostupnost: dostupan!

1198.25 RSD ili 7500 bod.

Slični proizvodi
-25%

Skala: 1:35
Proizvođač: Royal Model di R. Reale
Šifra proizvoda: RLM233
Dostupnost: dostupan!

5311.06 RSD 3976.27 RSD
ili 33400 bod.

-25%

Skala: 1:35
Proizvođač: Royal Model di R. Reale
Šifra proizvoda: RLM334
Dostupnost: dostupan!

2110.35 RSD 1582 RSD
ili 13300 bod.

Skala: 1:35
Proizvođač: Tamiya
Šifra proizvoda: tam35357
Dostupnost: dostupan!

1877.17 RSD ili 11300 bod.

Skala: 1:35
Proizvođač: Hobby Boss
Šifra proizvoda: HBB80150
Dostupnost: dostupan!

5505.71 RSD ili 34600 bod.

Skala: 1:35
Proizvođač: Hobby Boss
Šifra proizvoda: HBB80151
Dostupnost: dostupan!

5505.71 RSD ili 34600 bod.

Skala: 1:35
Proizvođač: M-Model
Šifra proizvoda: MMO35013
Dostupnost: dostupan!

1707.14 RSD ili 10700 bod.

Skala: 1:35
Proizvođač: Royal Model di R. Reale
Šifra proizvoda: RLM227
Dostupnost: dostupan!

1954.63 RSD ili 12300 bod.

Skala: 1:72
Proizvođač: Peddinghaus-Decals
Šifra proizvoda: PED72F027
Dostupnost: dostupan!

792.25 RSD ili 5000 bod.

Skala: 1:72
Proizvođač: Caesar Miniatures
Šifra proizvoda: CAB08
Dostupnost: dostupan!

1125.95 RSD ili 7100 bod.

Skala: n/a
Proizvođač: Meng Model
Šifra proizvoda: MNG-WWT005
Dostupnost: dostupan!

1732.16 RSD ili 10900 bod.

Skala: 1:87
Proizvođač: Peddinghaus-Decals
Šifra proizvoda: PED87F020
Dostupnost: 2-6 недеља

792.25 RSD ili 5000 bod.

Skala: 1:72
Proizvođač: Germania-Figuren
Šifra proizvoda: GER-72-WW2-350
Dostupnost: po narudžbini

2947.37 RSD ili 18500 bod.